Filter Inserts

A wide range to fit every application.

All Triple R filter elements are Multipass-tested and guarantee consistent and reproducible micron ratings and filtration efficiency. The filter element range comes in 4 sizes (30, 50, 100 and 300 size), in various filter materials from cellulose to polyester to PP, and in 2 different setups (standard setup or ‘double stage’ D-series setup).

• Green print: M-series, 2 micron (ß2 >200)
• Blue print: E-series, 3 micron (ß3 >75)
• Orange print: X-series, 5 micron (ß5 >75)
• Red print: D-series, 2 micron (ß3 >75) + 80% higher dirt holding capacity

The Triple R 3-stage filtration concept.

• The axial flow creates a 114 mm thick filter buildup.
• The combination of Triple R’s special cellulose material and the thickness of the element allows absorbing of water and sludge.
• The lower part is compressed by a carton box, creating an even finer filter medium.
  1. Big particles stay on top of the element.
  2. Smaller particles are captured in the upper non-compressed part.
  3. The smallest particles are captured in the lower compressed part

Flexible sizing.

Triple R offers a wide range of filter housings that run from 1 up to 6 filter elements. That allows increasing the flow rate, and thus using Triple R for very large oil volumes and for achieving important flow rates, up to 60,0 l/min.

Download the overview here.

Ask your Triple R representative for detailed information.